Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
(as of Nov 05,2021 20:23:23 UTC – Details)
Temperature Control Range：-50~120 °C / -58~248 ° F
Temperature Resolution：0.1 ° C / 0.1° F
Temperature Accuracy：±1°C (-50 ~ 70°C) / ±2°F (-58 ~ 160° F)
Heating and Cooling Power Socket
Temperature Control Mode：On/Off Control, Heating and Cooling
Input Power：100 ~240VAC, 50Hz/60Hz
Temperature Control Output：Max. 10A, 100V ~240V AC
Relay Contact Capacity：Heating (10A, 100-240VAC)/Cooling (10A, 100-240VAC)
Plug & Play
Buzzer Alarm：High and Low Temperature Alarm
Ambient Temperature：-30~ 75 ° C / -22~ 167 ° F
Dimension (Main Body)：5.5×2.7×1.3 inch (140x68x33mm)
Sensor Type：NTC sensor (Including)
Sensor Length：1.8m / 6.0ft
Input Power Cable Length： 6ft ( 2m)
1# ITC-308 is an easy-to-use, safe and reliable dual relay temperature controller.
2# Can be used as an over temperature protection and automatic temperature control system for various electric appliances such as equipment for home-brew, pet breeding,incubation, seedling heat mats, oven temperature control, terrestrial heat control, constant temperature cycle of heating pump, culture fermentation, accelerating germination, electric radiator, electric oven, etc.
Plug and play design, easy to use
Capable of raising or lowering temperature dependent upon current settings and ambient conditions
Display measurements in Centigrade or Fahrenheit
Maximum output load (heating or cooling): 1100W(110V)
Dual display window, capable of measuring temperature and setting temperature at the same time
Temperature calibration (if necessary)
Compressor delay protection for refrigeration control
Capable of setting high and low temperature alarms
Over-temperature and sensor fault alarm
1x ITC-308 Temperature Controller
Temperature and Humidity
Maximum Output Load
120VAC 60Hz 6.5Watts
120VAC 60Hz 20Watts
Temperature Measurement Range
-40~100°C / -40~212°F
-50~99 °C / -58~210 °F
-40~100°C / -40~212 °F
Humidity Measurement Range
Day and Night
10″ x 20″
🥇🥇【Easy to use】 Supports °C/°F display.
🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.